SHINKO CO., LTD

Home

Products

Company

Contact


Web Guide Systems

SNG(Shinko Web Guide System)is an auto-positioning system for the edges, lines and centers of a web.This system can greatly contribute to saving labors, resources and production costs, increasing prodctivity and product quality.

Hydraulic Web Guide System WINDER GUIDE
Air sensor detect the edge position of the material which runs a process line and receive the signal at power unit side.
The system of composition are hydraulic pump and air pump (source for detectors of air), which attached air regulator and servo valve assembly.
油圧式ウェブガイドシステム
■ Air Detector ■ Power Unit
An oil flow is replaced in proportion to a deviation signal by the servo valve on power unit, a guide mechanism is operated, and correction control of the run position of material at normal position.
In case of need, We can supply the explosion-proof and .increased safety type explosion-proof.
CENTER GUIDE REWINDER GUIDE
中間ガイド 巻出ガイド
▲このページのトップへ

Power Unit Specification:

Air detector Pneumatic-Hyd. System
  J-25 J-50
Power unit Moter 400W
0.78MPa {8kgf/cm2}
4.5ℓ/min
400W
1.27MPa {13kgf/cm2}
9.0ℓ/min
Hyd press
Oil Flow
Tank capacity 12.3ℓ
Air Pump 50ℓ/min
LP ( Standard)
HP ( High pressure) Plant air type
2.2kPa {9 INH2O}
3.73kPa
 
Detector Twin flow air type detector ( Air pressure 1.23~2.45kPa)
Performance Max. Thrust
Max. Speed ( No Load)
Accuracy of detector
1.4kN { 140kgf (φ50cyl) }
27mm/sec(φ50)
0.05mm
6.1kN { 625kgf (φ80cyl) }
21mm/sec(φ80)
0.05mm
※Rated capacity   400W 400W
200V 400V 200V 400V
Breaker 5A 3A 5A 3A
Thermal 1.8A 0.9A 1.8A 0.9A
※It show reference data
Page Top
 
Copyright © SHINKO CO., LTD. ALL Right Reserved.